USB(A)MALE TO USB(A)MALE WHITE CABLE 10M AD-AA-81

An ADNET USB A Male to USB A Male 10M cable is a 10-meter long cable with a standard USB Type-A male connector on both ends.

Here’s a breakdown of its likely description and features:

Key Features:

• Connector Type: USB Type-A Male on both ends. This means both ends are the rectangular, flat connector typically found on computers, hubs, game consoles, etc., that is designed to plug into a female Type-A port.
• Length: 10 meters (approximately 33 feet). This is a significant length for a USB cable, which can sometimes lead to signal degradation if not properly designed.
• Data Transfer Rate: Typically supports USB 2.0 standards, which means a data transfer rate of up to 480 Mbps (Megabits per second). While some listings might mention “high speed,” this generally refers to USB 2.0’s “high-speed” mode, not USB 3.0 or higher.
• Plug and Play: Designed for easy connection without requiring additional drivers or complex setup.
• Hot Swappable: Allows devices to be connected and disconnected while the computer or host device is powered on.
• Shielding: Often features foil and braid shielding to reduce EMI/RFI interference and crosstalk, ensuring more stable and error-free data transfer, especially important over longer lengths.
• Power Delivery: Can provide power to connected devices, although extended lengths might experience voltage drop, which could affect high-power demand devices.

Common Uses/Applications (for USB A Male to USB A Male cables in general):

While USB-A to USB-A male cables are not standard for connecting two host computers directly (this can cause issues with power supplies and is generally not supported by software stacks), they do have specific applications:

• Connecting Peripherals with Non-Standard Ports: Sometimes, a device that acts as a “device” (like an external hard drive enclosure or some older peripherals) might have a Type-A female port, requiring an A-male to A-male cable to connect to a computer’s A-female port.
• Connecting USB Hubs or Repeaters: They can be used to connect devices like active USB hubs or repeaters that have a USB-A input.
• Specialized Devices: Certain specialized equipment, like some audio/video devices or scientific instruments, might require this type of connection for data transfer or control.
• Data Transfer between specific devices: Some devices are designed to communicate directly using an A-male to A-male cable for data transfer, often with specific software on both ends. However, this is less common for general-purpose computer-to-computer connections.
• Extending USB Connections (less common for A-male to A-male, more common for A-male to A-female extension cables): While the term “extension cable” might come up, for A-male to A-male, it’s about connecting two specific A-port devices, not extending a single connection like a male-to-female cable would.

Important Considerations for 10M Length:

• Signal Degradation: At 10 meters, USB 2.0 signals can experience degradation. To mitigate this, high-quality cables will often have good shielding and potentially thicker copper wires. For highly reliable connections or for power-hungry devices, an active USB extension cable (which has built-in signal repeaters) is generally recommended for lengths beyond 5 meters.
• Power Drop: Longer cables can lead to a voltage drop, which might affect the performance or even operation of devices that draw power directly from the USB port.

In summary, an ADNET USB A Male to USB Male 10M cable is a long USB 2.0 cable designed for data transfer and power delivery between devices with compatible USB-A ports, often utilized for connecting specific peripherals or in scenarios where the device on one end also has a Type-A female port. For optimal performance over this length, especially with power-sensitive devices, considering an active USB extension might be beneficial.